[volt-nuts] Kelvin Klips

[m k]

Hi,

I took a punt on one of those kelvin clip sets of three on ebay, said copper clips, but I took one and filed on the back near the point where I would solder on the wire instead of screwing down, and the material was brass.

M K

> From: holrum at hotmail.com
> To: volt-nuts at febo.com
> Date: Sun, 5 Aug 2012 04:48:36 +0000
> Subject: [volt-nuts] Kelvin Klips
> 
> 
> I have several sets of the Chinese ones from Ebay.  They are actually pretty good.  You can't beat them for the money.  They do use a metal spring to close the clips,  so if you are doing high freq LRC/AC type measurements,  they are not quite as good as the ones that use rubber. 		 	   		  
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.