[volt-nuts] Solartron 7150plus - Chasing AC gremlins

[Philip Pemberton]

On 24/12/12 15:54, David C. Partridge wrote:
> Re: Drift of RMS converter - wait until after 24 hour warm up - does it drift after that? If not all is well. 

Well, after an hour of warming up I'm getting calibration errors again...

Lowpoint 0.01V RMS (10mV)
Highpoint 0.2V RMS (200mV)
Range 0.2V

Confirmed the input values with the DSO and a calibrated Agilent
multimeter, but after entering these values the meter refuses to
calibrate. Display shows "ERROR". :(

So it looks like I'm back to the original fault...

Thanks,
-- 
Phil.
philpem at philpem.me.uk
http://www.philpem.me.uk/