[volt-nuts] WTB: OP16FJ or LT1022
The-al-bundy@home.nl
the-al-bundy at home.nl
Sat May 12 07:32:08 UTC 2012
I've got a brand new (un-cut) LTZ1000CH which I don't use. So if anyone is
interested please contact me.
Bram
----- Original Message -----
From: "John Devereux" <john at devereux.me.uk>
To: <volt-nuts at febo.com>
Sent: Saturday, May 12, 2012 9:00 AM
Subject: Re: [volt-nuts] WTB: OP16FJ or LT1022
>
> Yes I saw that one, that was posted here. In fact I was hoping for a
> recommendation from him (or others).
>
> New LTZ1000CH seem to be unavailable at present.
>
> John
>
> m k <m1k3k1 at hotmail.com> writes:
>
>> Caveat Emptor,
>>
>> It was on a newsgroup post or a forum post where a Chinese member
>> explained the various forms of trckery and provided pics of each type of
>> fudge as well as genuine ones. Some are just banged out of a hot PCB in
>> India by poor labour on less than a dollar a day pay from scrap
>> equipment.
>>
>> M K
>>
>>> From: john at devereux.me.uk
>>> To: volt-nuts at febo.com
>>> Date: Fri, 11 May 2012 08:18:01 +0100
>>> Subject: Re: [volt-nuts] WTB: OP16FJ or LT1022
>>>
>>>
>>> Hi,
>>>
>>> Where can one buy the genuine used LTZ1000 without the welded on legs?
>>>
>>> John
>>>
>>> m k <m1k3k1 at hotmail.com> writes:
>>>
>>> > Watch the ebay opamps, some of the LTZ1000's for instance are second
>>> > hand, but have "new" legs welded on to make them look unused, the same
>>> > thing happens with other devices too.
>>> >
>>> > I will try and look at stocks over the weekend, but I dont think I
>>> > have any of those.
>>> >
>>> > MK
>>> >
>>> >> From: david.partridge at perdrix.co.uk
>>> >> To: volt-nuts at febo.com; TekScopes at yahoogroups.com;
>>> >> TekScopes2 at yahoogroups.com; hp_agilent_equipment at yahoogroups.com
>>> >> Date: Thu, 10 May 2012 20:15:17 +0100
>>> >> Subject: [volt-nuts] WTB: OP16FJ or LT1022
>>> >>
>>> >> I'm looking for an OP16FJ or LT1022 (which I think would make an OK
>>> >> replacement) to repair a 7081 meter.
>>> >>
>>> >> Ideally in TO99 metal can, but DIP8 if I can't get one in TO99
>>> >>
>>> >> I'm aware that I can buy LT1022 in DIP8 direct from Linear
>>> >> Technology, but they want about $40 to ship them to me which make
>>> >> them rather expensive.
>>> >>
>>> >> I also know that there are some OP16s on eBay, but they too are
>>> >> rather costly.
>>> >>
>>> >> Is anyone able to help?
>>> >>
>>> >> Regards,
>>> >> David Partridge
>>> >>
>>> >>
>>> >> _______________________________________________
>>> >> volt-nuts mailing list -- volt-nuts at febo.com
>>> >> To unsubscribe, go to
>>> >> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
>>> >> and follow the instructions there.
>>> >
>>> > _______________________________________________
>>> > volt-nuts mailing list -- volt-nuts at febo.com
>>> > To unsubscribe, go to
>>> > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
>>> > and follow the instructions there.
>>> >
>>>
>>> --
>>>
>>> John Devereux
>>>
>>> _______________________________________________
>>> volt-nuts mailing list -- volt-nuts at febo.com
>>> To unsubscribe, go to
>>> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
>>> and follow the instructions there.
>>
>> _______________________________________________
>> volt-nuts mailing list -- volt-nuts at febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
>> and follow the instructions there.
>>
>
> --
>
> John Devereux
>
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.
More information about the volt-nuts
mailing list