[volt-nuts] Tek 5 series PIs --MORE
J. Forster
jfor at quikus.com
Sat Aug 3 15:55:48 EDT 2013
I forgot to add, the TM5000 are also identical mechanically to the TM500
and 5000 'scopes.
The TM5000 and TM500 are sometimes electrically compatible, but don't bet
on it. Compatibility is a case-by-case thing.
FYI:
5000 PIs are identified: 5Axx, 5Bxx, 5Cxx, 5Lxx ...
(digit 5; letter for function; two digit sequence)
TM500 PIs are identified: AM50x, DC50x, PS50x ...
(two letter function; numbers 50; one digit sequence)
TM5000 PIs are identified: DM5001, PS5004, ...
(two letter function; numbers 500; one digit sequence)
-John
====================
> Mechanically, the TM500 and 5000 'scope PIs are identical. The ONLY
> difference is the card-edge connector keying slots.
>
> They are not compatible electrically.
>
> In fact, the TM500 MFs and the 5000 'scope MFs are often damaged by
> shoving in the wrong PI.
>
> I posted the TM500 dimensions earlier. Tge 5000 'scoipe are the same.
>
> -John
>
> ==================
>
>
>
>> Hi all -- my bad on the title and question -- I need the dimensions of
>> the
>> PIs for the 5000 series scopes. Hope someone can help...
>> _______________________________________________
>> volt-nuts mailing list -- volt-nuts at febo.com
>> To unsubscribe, go to
>> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
>> and follow the instructions there.
>>
>>
>
>
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.
>
>
More information about the volt-nuts
mailing list