[volt-nuts] Agilent calibration

[Orin Eman]

Take a look at: cp.literature.agilent.com/litweb/pdf/5989-5729ENA1.pdf

It's well hidden on the Agilent web site, but if you dig enough, you'll
find it.

You should get the "As Received" data for all Agilent calibrations.  You
only get the "As Shipped" data if they did any adjustments.

Orin.


On Tue, Aug 13, 2013 at 6:04 PM, Joseph Gray <jgray at zianet.com> wrote:

> Since some of you have used Agilent calibration, perhaps you can answer a
> question for me. The Agilent web site lists this description for one of the
> options:
>
> *"Agilent Calibration Per Incident* - Calibration using full
> manufacturer-defined procedures, including adjustments and pre/post data
> for out of tolerance instruments."
>
> The way I read this is that if I send them a DMM that is within spec, they
> won't adjust it or provide pre/post data. Is this the case? If I spend over
> $200 sending a DMM to them, I want it adjusted to the best possible specs
> and I want the data. I do not want someone just saying that it is good
> enough and send it back to me. I can get that for $50 in El Paso.
>
> Joe Gray
> W5JG
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.
>