[volt-nuts] New Life of the Solartron 7081

[Mark Kahrs]

I think the preceding article:

http://bbs.38hot.net/read-htm-tid-15406.html

Is even more interesting!

So, why did you post this on a chinese BBS Mickle?  (just curious)

On Thu, Jan 10, 2013 at 6:02 AM, Fabio Eboli <FabioEb at quipo.it> wrote:

> Although way above my knowledge and skills,
> thank you very much for sharing, excellent
> work and read, Mickle!!
>
> Fabio.
>
> Il 2013-01-10 10:08 Михаил ha scritto:
>
>  Hi!
>> At last I completed the repairing and modifying the Solartron 7081 DMM:
>> http://bbs.38hot.net/read-htm-**tid-36350.html<http://bbs.38hot.net/read-htm-tid-36350.html>
>> Zener reference was totally dismounted and replaced with DIY LTZ1000
>> board.
>> Moreover the floating logic PLL clock was made a switchable to
>> crystal oscillator
>> with a lower phase noise.
>> After all, low-frequency noise is halved to 0.028 ppm (better than
>> Keitley 2002,
>> Datron 1271 and Advantest 6581T), TempCo is less 0.2 ppm/C, long-term
>> drift
>> approximation is 1-2 ppm/year.
>>
>> Regards,
>> Mickle T./iddqd2001
>>
>>
>> ______________________________**_________________
>> volt-nuts mailing list -- volt-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/**
>> mailman/listinfo/volt-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts>
>> and follow the instructions there.
>>
>
> ______________________________**_________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/**
> mailman/listinfo/volt-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts>
> and follow the instructions there.
>