[volt-nuts] Data Proof 160A

[Jason Watson]

I just uploaded the 160A manual to K04BB's site.  I still use a 160A at my
place of employment and it does work with a newer NI GPIB-USB adapter.
 Programming is fairly simple.  Command "A##" where ## is the number of the
relay will turn off any other relays on the 'A' line and actuate relay
'##'.  Sending '00' for the number will turn off all relays on the 'A'
line.  Command "B##" will do the same for the 'B' line.  All commands are
terminated with a CR-LF.