[volt-nuts] Datron 1082

[Randy Evans]

Todd,

That does look like the battery in my 1082. I don't see any markings on the
battery in my unit but I can't see the back side until I remove it.

I assume the original was 3.6 VDC also but I'm not sure how to verify that.


Thanks for the help.

Randy


On Tue, Apr 22, 2014 at 7:07 PM, T. Micallef <tmicallef at gmail.com> wrote:

> Randy Evans <randyevans2688 at ...> writes:
>
> >
> > The schematic of the Datron 1071 DMM seems to be very similar to the
> Datron
> > 1082 but I'm sure there are differences.  Unfortunately, I have not been
> > able to locate the 1082 Service Manual with the parts lists and
> schematics.
> >  The 1071 manual does have a similar or identical battery but I can't
> find
> > the part number in the 1071  parts list.  Does anyone know the part
> number
> > of the memory battery in the 1082 or 1071, or the characteristics; e.g.,
> > voltage and A-H rating?
> >
> > Thanks,
> >
> > Randy Evans AE6YG
> >
> > On Mon, Apr 21, 2014 at 8:32 PM, Tom Knox <actast at ...> wrote:
> >
>
> I popped the top off of my mothballed 1071 and it looks like a 1/2AA
> battery
> based on physical measurements. It looks like the one in the following link
>
> http://www.zbattery.com/Tadiran-TL-5151-with-tabs-1-2-AA-Lithium-Battery
>
> Todd
>
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to
> https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.
>