[volt-nuts] 3458a with 202: Slave Test Convergence (sigh)

[Tom Knox]

The dreaded 202 convergence error, If you need help contact me off list.
Best Wishes;

Thomas Knox



> From: pitts7 at williams-net.com
> To: volt-nuts at febo.com
> Date: Thu, 27 Mar 2014 14:35:42 -0400
> Subject: [volt-nuts] 3458a with 202: Slave Test Convergence (sigh)
> 
> I know that HP will (gladly?) take your sick 3458 and bring it up to current specs, followed by a calibration. Since my sick one is at engineering level 2 or 3.something, it must be like it was built in 1989 - the dates on some components.
> 
> Should I try to do any troubleshooting, or just send it to HP?  
> 
> Will they upgrade the current (aged and pretty much not drifting) boards?
> 
> Or do they take a good board from their stock and replace the current board with one that may be new and 'drifty'?
> 
> I have read here that there are some unlisted upgrades that they do, also.
> 
> The RAM batteries will be replaced also, right? 
> 
> The biggest positive I see is the ability to go on the service plan and never have to worry about a failure again after the 3458 is brought up to current standards.
> 
> Willy
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.