[volt-nuts] Old HP3458A - SN: 2823A 03939

[acbern at gmx.de]

hi
the EPROMs are in sockets, no soldering needed.
but again, buying a precision instrument but reprogramming cal data that is years old does not make any sense.
unless of course if you are just a collector and do not use its accuracy.
adrian


> Gesendet: Dienstag, 07. Oktober 2014 um 16:35 Uhr
> Von: cfo <xnews5 at luna.dyndns.dk>
> An: volt-nuts at febo.com
> Betreff: Re: [volt-nuts] Old HP3458A - SN: 2823A 03939
>
> I'm now the proud owner of a HP 3458A OPT-002.
> 
> I have adapted Mark's 3458A CalRam program to use linux-gpib , and have 
> made backups of the calram , and the dataram.
> 
> I will get a new calram : 
> http://tinyurl.com/mggqmos
> 
> And 2 x dataram : 
> http://tinyurl.com/otspeek
> 
> 
> I'll  get 4 x 32k SRAM for opt 001 - hopefully these are correct. 
> http://tinyurl.com/kjbtcla
> 
> 
> Does anyone know if the Eproms are already in sockets ?
> 
> I was planning on installing sockets for the calram , datarams , but have 
> hoped the eeproms was already in sockets.
> 
> 
> TIA
> CFO - Denmark
> 
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.
>