[volt-nuts] PCBs with ceramic substrates
John Devereux
john at devereux.me.uk
Wed Apr 12 07:11:41 EDT 2017
Hi all
Yes some industrial ceramics are very tough but the few I have
encountered as substrates for electronics were delicate and
brittle. ("Hybrid" circuits like pressure transducers or ceramic IC
packages as below).
John
Mark Sims <holrum at hotmail.com> writes:
> Not always.. A guy I worked with was pulling a ceramic 40 pin dip out
> of a socket when it broke... sliced his finger to the bone. There
> was initially some concern that it was a BeO ceramic. Checking with
> the manufacturer showed it was not. I checked the socket afterwards,
> and it seemed normal and had no problems releasing other chips.
>
> ----------------
>
>> You really have to work to break these things.
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.
>
--
John Devereux
More information about the volt-nuts
mailing list