[volt-nuts] DAS-46

[Jerry Hancock]

I just sent Charles a note off-list.

This morning I received replacement FETs for the MFE3002 using ECG220s.  These came with a little spring around the leads keeping the leads shorted as they are high impedance.  I replaced the suspect FET and the unit is working!  Go figure, as I suspected I was moving the problem around and I guess the first FET I put in was bad.

Anyway, I appreciate all the support and help provided by such an august group of members and will send along a plot of the device once it warms over a few days.

Jerry