[volt-nuts] Fluke 332B

[m k]

On 08/07/2017 21:36, Andreas Bergmann wrote:
> Hello Dave,
>
> Am 08.07.2017 14:09, schrieb David C. Partridge:
>> 4) I'm leery of the chopper amp, did anyone (Dr. Frank?) do a retrofit using
>> a modern chopper op-amp or similar?
>
>
> You may want to have a look at this thread:
> https://www.eevblog.com/forum/testgear/fluke-332baf-in-the-slaughterhouse/
>
> http://www.friedrich-messtechnik.de/index.php/bauanleitungen/87-fluke335-332 (sorry, it is German)
>
> I have created some PCBs based on the schematics shown on this website.
>
> If you are interested, I can send you one for the shipping costs.
>
> It is working well in my Fluke 3330B which is using the same design as the 332.
>
> Regards,
>
> Andreas
> _______________________________________________
> volt-nuts mailing list -- volt-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts
> and follow the instructions there.
> .
>
Hi Andreas,

I also have a 3330B which could do with an updated chopper PCB, how many spare boards do you have ( I only need 1)

Regards,

M K