[volt-nuts] Agilent 3458A Issues

[Poul-Henning Kamp]

--------
In message <CANwu9Jb0yQBdZXei8PoU7F_hDbXvKdgno1J7XfyyAGGYSTX0Og at mail.gmail.com>
, Randy Evans writes:

>When I try to execute a 10V cal, I get an error code "209 HARDWARE FAILURE
>- - INTERNAL OVERLOAD:31" I suspect that the unit has a different security
>code than 3458.

The 3458 is quite elonquent, and will say so clearly if that is the
problem.

209 means that the compiled in limit on one of all the many
calibration values is out of range.

-- 
Poul-Henning Kamp       | UNIX since Zilog Zeus 3.20
phk at FreeBSD.ORG         | TCP/IP since RFC 956
FreeBSD committer       | BSD since 4.3-tahoe    
Never attribute to malice what can adequately be explained by incompetence.