[volt-nuts] Redrafted schematic of Fluke 732A reference circuit

[m k]

On 21/01/2018 18:27, Bob Albert via volt-nuts wrote:
>   I can't seem to make the link work.
> Bob
>      On Sunday, January 21, 2018, 9:49:32 AM PST, David C. Partridge <david.partridge at perdrix.co.uk> wrote:
>   
>   Darn the URL got split:
>
> <https://www.eevblog.com/forum/repair/fluke-732a-repair/?action=dlattach;attach=388476>
>
> Dave
>
> -----Original Message-----
> From: volt-nuts [mailto:volt-nuts-bounces at febo.com] On Behalf Of David C. Partridge
> Sent: 21 January 2018 17:44
> To: 'Discussion of precise voltage measurement'
> Subject: [volt-nuts] Redrafted schematic of Fluke 732A reference circuit
>
> I have redrafted the schematic for the Reference Circuit on the A5 board using "normal conventions" so it should be easier to understand.
>
> I've included the components that are hosted on the A4 board for clarity.
> Q2 acts as current limiter.
>
> The file is a little large so you can find it here:
> ...
>
> HtH
> Dave Partridge
you possibly need to be logged into eevblog at the same time as you follow the link?