Thanks to all those who have also answered me directly.(spade Lugs) At a flea market I bought two references, one for voltage and other for current, Digistand 6406 and 6426 respectively. I wrote to the manufacturer for the manuals and he sent me the one for 6426 but he told me that he did not find the one that interested me most , ie voltage reference 6406. I repaired both power supplies that had shorted electrolytic capacitors and for one of them I had to replace the custom power transformer. Now they both work but the voltage calibrator needs to be calibrated. Inside are a handful of trimmers but no indication of their function. Calibration is not possible without manual. Extreme ratio I want to ask you if any of you have this manual. Thank you, Luciano Luciano P. S. Paramithiotti timeok@timeok.it www.timeok.it Da "volt-nuts" volt-nuts-bounces@lists.febo.com A volt-nuts@lists.febo.com Cc Data Thu, 13 Aug 2020 12:00:02 -0400 Oggetto volt-nuts Digest, Vol 129, Issue 6 Send volt-nuts mailing list submissions to volt-nuts@lists.febo.com To subscribe or unsubscribe via the World Wide Web, visit http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com or, via email, send a message with subject or body 'help' to volt-nuts-request@lists.febo.com You can reach the person managing the list at volt-nuts-owner@lists.febo.com When replying, please edit your Subject line so it is more specific than "Re: Contents of volt-nuts digest..." Today's Topics: 1. Spade lug (timeok@timeok.it) 2. Re: Spade lug (Lou Amadio) 3. Re: Spade lug (Jason Watson) 4. Re: Spade lug (Andreas Bergmann) 5. Re: Spade lug (Tom Knox) ---------------------------------------------------------------------- Message: 1 Date: Thu, 13 Aug 2020 10:01:22 +0200 From: timeok@timeok.it To: volt-nuts@lists.febo.com Subject: [volt-nuts] Spade lug Message-ID: <QEZSYA$6DC657CB34092F310F84BC130523B2C7@timeok.it> Content-Type: text/plain; charset=utf-8 Hi all you, I am looking some pure Copper spade lug for metrology measurements. Up now I have not found it on the web. Can you help me? Luciano Luciano P. S. Paramithiotti timeok@timeok.it www.timeok.it ------------------------------ Message: 2 Date: Thu, 13 Aug 2020 19:57:16 +1000 From: Lou Amadio <lou.amadio11@gmail.com> To: timeok@timeok.it, Discussion of precise voltage measurement <volt-nuts@lists.febo.com> Subject: Re: [volt-nuts] Spade lug Message-ID: <CAJU4AHcxeOstC034tkWCJO6nU5v5Hv3rx92X7E7kAPKY4pQD3Q@mail.gmail.com> Content-Type: text/plain; charset="UTF-8" Hi Luciano Try the Metrology thread on the EEVBLOG forum. There were some available sometime ago. Post a request and you might get lucky. Lou On Thu, Aug 13, 2020 at 6:02 PM <timeok@timeok.it> wrote: > > Hi all you, > > I am looking some pure Copper spade lug for metrology measurements. > > Up now I have not found it on the web. > > Can you help me? > > Luciano > > Luciano P. S. Paramithiotti > timeok@timeok.it > www.timeok.it > _______________________________________________ > volt-nuts mailing list -- volt-nuts@lists.febo.com > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com > and follow the instructions there. > ------------------------------ Message: 3 Date: Thu, 13 Aug 2020 08:08:24 -0400 From: Jason Watson <watson.jason@gmail.com> To: Discussion of precise voltage measurement <volt-nuts@lists.febo.com> Cc: timeok@timeok.it Subject: Re: [volt-nuts] Spade lug Message-ID: <CAJBUnwq7CCpfW3_n-adZ2LH24DsGa8ezUgNMFWKB7jAwHJLJEQ@mail.gmail.com> Content-Type: text/plain; charset="UTF-8" EDL also makes some you can order online. You can get just copper or gold plated over copper. https://www.edl-inc.com/Copper-Instrument-Lugs-25-Qty_p_51.html On Thu, Aug 13, 2020 at 5:58 AM Lou Amadio <lou.amadio11@gmail.com> wrote: > Hi Luciano > Try the Metrology thread on the EEVBLOG forum. There were some available > sometime ago. Post a request and you might get lucky. > Lou > > On Thu, Aug 13, 2020 at 6:02 PM <timeok@timeok.it> wrote: > > > > > Hi all you, > > > > I am looking some pure Copper spade lug for metrology measurements. > > > > Up now I have not found it on the web. > > > > Can you help me? > > > > Luciano > > > > Luciano P. S. Paramithiotti > > timeok@timeok.it > > www.timeok.it > > _______________________________________________ > > volt-nuts mailing list -- volt-nuts@lists.febo.com > > To unsubscribe, go to > > http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com > > and follow the instructions there. > > > _______________________________________________ > volt-nuts mailing list -- volt-nuts@lists.febo.com > To unsubscribe, go to > http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com > and follow the instructions there. > ------------------------------ Message: 4 Date: Thu, 13 Aug 2020 14:34:45 +0200 From: Andreas Bergmann <mounty@mounty.de> To: volt-nuts@lists.febo.com Subject: Re: [volt-nuts] Spade lug Message-ID: <87fb2fed-9d7e-dd94-eb74-761baa638d9e@mounty.de> Content-Type: text/plain; charset=utf-8; format=flowed Hi Luciano, On 13.08.20 10:01, timeok@timeok.it wrote: > I am looking some pure Copper spade lug for metrology measurements. > > Up now I have not found it on the web. > > Can you help me? Perhaps Adrian can help you: https://www.ab-precision.de/products/cables-accessories/ Best regards, Mounty ------------------------------ Message: 5 Date: Thu, 13 Aug 2020 14:52:29 +0000 From: Tom Knox <actast@hotmail.com> To: "timeok@timeok.it" <timeok@timeok.it>, Discussion of precise voltage measurement <volt-nuts@lists.febo.com> Subject: Re: [volt-nuts] Spade lug Message-ID: <CY4PR04MB04727CB14AC36EDEF51A9C4BDF430@CY4PR04MB0472.namprd04.prod.outlook.com> Content-Type: text/plain; charset="iso-8859-1" Hi Luciano; I have found a great source. They of copper as well as direct gold-plated copper. A small company JW Solutions. They manufacture spade specifically for metrology application. http://jswilley.com/ DC Metrology Resistance Standards Temperature Thermometry Pressure Repair Calibration Service<http://jswilley.com/> DC Metrology Primary & Secondary Standards, Temperature Probes & SPRTs, Pressure Standards, Repair & Calibration Service Referrals, Air & Fluid Baths & Automated Resistance Thermometry Bridges. jswilley.com The owner has worked for companies such as Guildline and Measurements international. Another source is the Audiophile world. But that is more hit or miss on actual quality. Cheers; Tom Knox SR Test and Measurement Engineer Ascent Concepts and Technology 4475 Whitney Place Boulder Colorado 80305 303-554-0307 actast@hotmail.com "Peace is not the absence of violence, but the presence of Justice" Both MLK and Albert Einstein ________________________________ From: volt-nuts <volt-nuts-bounces@lists.febo.com> on behalf of timeok@timeok.it <timeok@timeok.it> Sent: Thursday, August 13, 2020 2:01 AM To: volt-nuts@lists.febo.com <volt-nuts@lists.febo.com> Subject: [volt-nuts] Spade lug Hi all you, I am looking some pure Copper spade lug for metrology measurements. Up now I have not found it on the web. Can you help me? Luciano Luciano P. S. Paramithiotti timeok@timeok.it www.timeok.it<http://www.timeok.it> _______________________________________________ volt-nuts mailing list -- volt-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com and follow the instructions there. ------------------------------ Subject: Digest Footer _______________________________________________ volt-nuts mailing list volt-nuts@lists.febo.com http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com ------------------------------ End of volt-nuts Digest, Vol 129, Issue 6 *****************************************

 Thanks to all those who have also answered me directly.(spade Lugs)

 At a flea market I bought two references, one for voltage and other for current, Digistand 6406 and 6426 respectively. I wrote to the manufacturer for the manuals and he sent me the one for 6426 but he told me that he did not find the one that interested me most , ie voltage reference 6406. I repaired both power supplies that had shorted electrolytic capacitors and for one of them I had to replace the custom power transformer.

 Now they both work but the voltage calibrator needs to be calibrated. Inside are a handful of trimmers but no indication of their function. Calibration is not possible without manual. Extreme ratio I want to ask you if any of you have this manual.

 Thank you,

 Luciano

Hello Luciano, On 22.08.20 14:35, timeok@timeok.it wrote: > > Thanks to all those who have also answered me directly.(spade Lugs) > > At a flea market I bought two references, one for voltage and other for current, Digistand 6406 and 6426 respectively. I wrote to the manufacturer for the manuals and he sent me the one for 6426 but he told me that he did not find the one that interested me most , ie voltage reference 6406. I repaired both power supplies that had shorted electrolytic capacitors and for one of them I had to replace the custom power transformer. > > Now they both work but the voltage calibrator needs to be calibrated. Inside are a handful of trimmers but no indication of their function. Calibration is not possible without manual. Extreme ratio I want to ask you if any of you have this manual. > > Thank you, > > Luciano in 2016, quarks from the EEVBlog forum has offered exactly those two models. Perhaps he can help you with a manual. https://www.eevblog.com/forum/buysellwanted/fs-burster-calibrator-(location-germany)/ HTH Best regards, Mounty