Thanks to everyone,
I received a couple of interesting proposals to which I replied directly.
Luciano
Luciano P. S. Paramithiotti
timeok@timeok.it
www.timeok.it
Da "volt-nuts" volt-nuts-bounces@lists.febo.com
A volt-nuts@lists.febo.com
Cc
Data Mon, 07 Sep 2020 12:00:03 -0400
Oggetto volt-nuts Digest, Vol 130, Issue 5
Send volt-nuts mailing list submissions to
volt-nuts@lists.febo.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
or, via email, send a message with subject or body 'help' to
volt-nuts-request@lists.febo.com
You can reach the person managing the list at
volt-nuts-owner@lists.febo.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of volt-nuts digest..."
Today's Topics:
Message: 1
Date: Mon, 07 Sep 2020 09:42:46 +0200
From: Rob Klein rob.klein@smalldesign.nl
To: timeok@timeok.it,Iwa2008 via volt-nuts volt-nuts@lists.febo.com
Subject: Re: [volt-nuts] volt-nuts Digest, Vol 130, Issue 2
Message-ID: f1a372d6-0aa2-4b51-a357-6064cd0d3beb@smalldesign.nl
Content-Type: text/plain; charset=UTF-8
Hi Luciano,
Just in case you missed my response to the group: I have an 8505A with the AC+DC option which I am willing to sell.
It also has the Ohms and current options, as well as a defective IEEE interface.
I think ? 300,- would be a fair price. Shipping from The Netherlands would be ? 39 (registered with ? 500 insurance).
Let me know if you are interested.
?Met vriendelijke groet,
Rob Klein
verstuurd vanaf mijn smartphone?
Op 2 sep. 2020 20:03, om 20:03, timeok@timeok.it schreef:
Lou,
I have seen it but outside Europe and in Australia the shipping and
customs costs are prohibitive, especially for items that honestly have
a very low value.
Also it seems to me that the seller does not guarantee the functioning.
I would also be fine with an 8505A with AC DC options.
Luciano
Luciano P. S. Paramithiotti
timeok@timeok.it
www.timeok.it
Da "volt-nuts" volt-nuts-bounces@lists.febo.com
A volt-nuts@lists.febo.com
Cc
Data Wed, 02 Sep 2020 12:00:04 -0400
Oggetto volt-nuts Digest, Vol 130, Issue 2
Send volt-nuts mailing list submissions to
volt-nuts@lists.febo.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
or, via email, send a message with subject or body 'help' to
volt-nuts-request@lists.febo.com
You can reach the person managing the list at
volt-nuts-owner@lists.febo.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of volt-nuts digest..."
Today's Topics:
Message: 1
Date: Wed, 2 Sep 2020 06:13:34 +1000
From: Lou Amadio lou.amadio11@gmail.com
To: timeok@timeok.it, Discussion of precise voltage measurement
volt-nuts@lists.febo.com
Subject: Re: [volt-nuts] Fluke 8506A looking
Message-ID:
CAJU4AHdB9-+kBe12-a+Z_iee3zbEbEJHwqSDz5f-fBJyg4ktYg@mail.gmail.com
Content-Type: text/plain; charset="UTF-8"
There is one in Australia
https://www.ebay.com.au/itm/Fluke-8506A-Thermal-RMS-digital-multimeter/123942970490?hash=item1cdb93a47a:g:ZeIAAOSw8A1dqC5q&frcectupt=true
Lou
On Tue, Sep 1, 2020 at 9:46 PM timeok@timeok.it wrote:
Hi,
I am looking for a Fluke 8506A. I bought one on ebay but it came
without the AC / DC thermal converter and it didn't even work in DC.
I kept it for spare parts but now I want one cheap.
If you have one or you know where I can go, thank you.
My Agilent 34401 has quite disappointed me because in ACV it is a
disaster in both low-level accuracy and frequency response. My Fluke
8502
with the thrue rms converter in comparison is very flat 10Hz - 50kHz
and
over. The HP when measuring 12V for example becomes a 5 1/2 digit
while the
Fluke remains 6 1/2 digit. So my question is: considering AC DC
accuracy
and stability what are the best 6.5 digits multimeters?
have a nice day,
Luciano
Luciano P. S. Paramithiotti
timeok@timeok.it
www.timeok.it
Da "volt-nuts" volt-nuts-bounces@lists.febo.com
A volt-nuts@lists.febo.com
Cc
Data Sat, 22 Aug 2020 12:00:02 -0400
Oggetto volt-nuts Digest, Vol 129, Issue 7
Send volt-nuts mailing list submissions to
volt-nuts@lists.febo.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
or, via email, send a message with subject or body 'help' to
volt-nuts-request@lists.febo.com
You can reach the person managing the list at
volt-nuts-owner@lists.febo.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of volt-nuts digest..."
Today's Topics:
Message: 1
Date: Sat, 22 Aug 2020 14:35:31 +0200
From: timeok@timeok.it
To: volt-nuts@lists.febo.com
Subject: [volt-nuts] Spade lug/Digistand 6406 manual
Message-ID: QFGTN7$FE4E69E8F10800AF93E905B11D363BB3@timeok.it
Content-Type: text/plain; charset=utf-8
Thanks to all those who have also answered me directly.(spade Lugs)
At a flea market I bought two references, one for voltage and other
for
current, Digistand 6406 and 6426 respectively. I wrote to the
manufacturer
for the manuals and he sent me the one for 6426 but he told me that
he did
not find the one that interested me most , ie voltage reference 6406.
I
repaired both power supplies that had shorted electrolytic capacitors
and
for one of them I had to replace the custom power transformer.
Now they both work but the voltage calibrator needs to be calibrated.
Inside are a handful of trimmers but no indication of their function.
Calibration is not possible without manual. Extreme ratio I want to
ask you
if any of you have this manual.
Thank you,
Luciano
Luciano P. S. Paramithiotti
timeok@timeok.it
www.timeok.it
Da "volt-nuts" volt-nuts-bounces@lists.febo.com
A volt-nuts@lists.febo.com
Cc
Data Thu, 13 Aug 2020 12:00:02 -0400
Oggetto volt-nuts Digest, Vol 129, Issue 6
Send volt-nuts mailing list submissions to
volt-nuts@lists.febo.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
or, via email, send a message with subject or body 'help' to
volt-nuts-request@lists.febo.com
You can reach the person managing the list at
volt-nuts-owner@lists.febo.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of volt-nuts digest..."
Today's Topics:
Message: 1
Date: Thu, 13 Aug 2020 10:01:22 +0200
From: timeok@timeok.it
To: volt-nuts@lists.febo.com
Subject: [volt-nuts] Spade lug
Message-ID: QEZSYA$6DC657CB34092F310F84BC130523B2C7@timeok.it
Content-Type: text/plain; charset=utf-8
Hi all you,
I am looking some pure Copper spade lug for metrology measurements.
Up now I have not found it on the web.
Can you help me?
Luciano
Luciano P. S. Paramithiotti
timeok@timeok.it
www.timeok.it
Message: 2
Date: Thu, 13 Aug 2020 19:57:16 +1000
From: Lou Amadio lou.amadio11@gmail.com
To: timeok@timeok.it, Discussion of precise voltage measurement
volt-nuts@lists.febo.com
Subject: Re: [volt-nuts] Spade lug
Message-ID:
CAJU4AHcxeOstC034tkWCJO6nU5v5Hv3rx92X7E7kAPKY4pQD3Q@mail.gmail.com
Content-Type: text/plain; charset="UTF-8"
Hi Luciano
Try the Metrology thread on the EEVBLOG forum. There were some
available
sometime ago. Post a request and you might get lucky.
Lou
On Thu, Aug 13, 2020 at 6:02 PM timeok@timeok.it wrote:
Hi all you,
I am looking some pure Copper spade lug for metrology measurements.
Up now I have not found it on the web.
Can you help me?
Luciano
Luciano P. S. Paramithiotti
timeok@timeok.it
www.timeok.it
volt-nuts mailing list -- volt-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
and follow the instructions there.
Message: 3
Date: Thu, 13 Aug 2020 08:08:24 -0400
From: Jason Watson watson.jason@gmail.com
To: Discussion of precise voltage measurement
volt-nuts@lists.febo.com
Cc: timeok@timeok.it
Subject: Re: [volt-nuts] Spade lug
Message-ID:
CAJBUnwq7CCpfW3_n-adZ2LH24DsGa8ezUgNMFWKB7jAwHJLJEQ@mail.gmail.com
Content-Type: text/plain; charset="UTF-8"
EDL also makes some you can order online. You can get just copper or
gold
plated over copper.
https://www.edl-inc.com/Copper-Instrument-Lugs-25-Qty_p_51.html
On Thu, Aug 13, 2020 at 5:58 AM Lou Amadio lou.amadio11@gmail.com
wrote:
Hi Luciano
Try the Metrology thread on the EEVBLOG forum. There were some
available
sometime ago. Post a request and you might get lucky.
Lou
On Thu, Aug 13, 2020 at 6:02 PM timeok@timeok.it wrote:
Hi all you,
I am looking some pure Copper spade lug for metrology
measurements.
Up now I have not found it on the web.
Can you help me?
Luciano
Luciano P. S. Paramithiotti
timeok@timeok.it
www.timeok.it
volt-nuts mailing list -- volt-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
and follow the instructions there.
volt-nuts mailing list -- volt-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
and follow the instructions there.
Message: 4
Date: Thu, 13 Aug 2020 14:34:45 +0200
From: Andreas Bergmann mounty@mounty.de
To: volt-nuts@lists.febo.com
Subject: Re: [volt-nuts] Spade lug
Message-ID: 87fb2fed-9d7e-dd94-eb74-761baa638d9e@mounty.de
Content-Type: text/plain; charset=utf-8; format=flowed
Hi Luciano,
On 13.08.20 10:01, timeok@timeok.it wrote:
I am looking some pure Copper spade lug for metrology measurements.
Up now I have not found it on the web.
Can you help me?
Perhaps Adrian can help you:
https://www.ab-precision.de/products/cables-accessories/
Best regards,
Mounty
Message: 5
Date: Thu, 13 Aug 2020 14:52:29 +0000
From: Tom Knox actast@hotmail.com
To: "timeok@timeok.it" timeok@timeok.it, Discussion of precise
voltage measurement volt-nuts@lists.febo.com
Subject: Re: [volt-nuts] Spade lug
Message-ID:
<
Content-Type: text/plain; charset="iso-8859-1"
Hi Luciano;
I have found a great source. They of copper as well as direct
gold-plated copper. A small company JW Solutions. They manufacture
spade
specifically for metrology application.
http://jswilley.com/
DC Metrology Resistance Standards Temperature Thermometry Pressure
Repair Calibration Servicehttp://jswilley.com/
DC Metrology Primary & Secondary Standards, Temperature Probes &
SPRTs,
Pressure Standards, Repair & Calibration Service Referrals, Air &
Fluid
Baths & Automated Resistance Thermometry Bridges.
jswilley.com
The owner has worked for companies such as Guildline and Measurements
international.
Another source is the Audiophile world. But that is more hit or miss
on
actual quality.
Cheers;
Tom Knox
SR Test and Measurement Engineer
Ascent Concepts and Technology
4475 Whitney Place
Boulder Colorado 80305
303-554-0307
"Peace is not the absence of violence, but the presence of Justice"
Both MLK and Albert Einstein
From: volt-nuts volt-nuts-bounces@lists.febo.com on behalf of
timeok@timeok.it timeok@timeok.it
Sent: Thursday, August 13, 2020 2:01 AM
To: volt-nuts@lists.febo.com volt-nuts@lists.febo.com
Subject: [volt-nuts] Spade lug
Hi all you,
I am looking some pure Copper spade lug for metrology measurements.
Up now I have not found it on the web.
Can you help me?
Luciano
Luciano P. S. Paramithiotti
timeok@timeok.it
www.timeok.ithttp://www.timeok.it
volt-nuts mailing list -- volt-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
and follow the instructions there.
Subject: Digest Footer
volt-nuts mailing list
volt-nuts@lists.febo.com
http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
End of volt-nuts Digest, Vol 129, Issue 6
Message: 2
Date: Sat, 22 Aug 2020 14:58:28 +0200
From: Andreas Bergmann mounty@mounty.de
To: volt-nuts@lists.febo.com
Subject: Re: [volt-nuts] Spade lug/Digistand 6406 manual
Message-ID: e4b30bdc-30bd-d4cd-1005-2a5e454ae117@mounty.de
Content-Type: text/plain; charset=utf-8; format=flowed
Hello Luciano,
On 22.08.20 14:35, timeok@timeok.it wrote:
Thanks to all those who have also answered me directly.(spade Lugs)
At a flea market I bought two references, one for voltage and other
for current, Digistand 6406 and 6426 respectively. I wrote to the
manufacturer for the manuals and he sent me the one for 6426 but he
told me
that he did not find the one that interested me most , ie voltage
reference
Now they both work but the voltage calibrator needs to be
calibrated.
Inside are a handful of trimmers but no indication of their function.
Calibration is not possible without manual. Extreme ratio I want to
ask you
if any of you have this manual.
Thank you,
Luciano
in 2016, quarks from the EEVBlog forum has offered exactly those two
models.
Perhaps he can help you with a manual.
HTH
Best regards,
Mounty
Subject: Digest Footer
volt-nuts mailing list
volt-nuts@lists.febo.com
http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
End of volt-nuts Digest, Vol 129, Issue 7
volt-nuts mailing list -- volt-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
and follow the instructions there.
Subject: Digest Footer
volt-nuts mailing list
volt-nuts@lists.febo.com
http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
End of volt-nuts Digest, Vol 130, Issue 2
volt-nuts mailing list -- volt-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
and follow the instructions there.
Subject: Digest Footer
volt-nuts mailing list
volt-nuts@lists.febo.com
http://lists.febo.com/mailman/listinfo/volt-nuts_lists.febo.com
End of volt-nuts Digest, Vol 130, Issue 5