[time-nuts] HP Z3805A com port and monitoring questions
Said Jackson
saidjack at aol.com
Mon Oct 15 12:45:40 UTC 2012
Edgardo,
Pretty sure it was 9600 8N1 no flow control.
Came right up in GPSCon..
Maybe its your cable, I used the cable that was shipped to me with the unit.
I did have to manually initiate the auto survey, so comms are important..
Bye
Said
Sent From iPhone
On Oct 14, 2012, at 21:36, Edgardo Molina <xe1xus at amsat.org> wrote:
> Dear Said,
>
> I am having a very hard time trying to guess the communication port configuration of the HP Z3805A. I am trying with different port settings to match the PC and using different monitor and control programs. The afternoon was not that fruitful regarding this. Is there a chance you have the default port configuration for the Z3805A so I can match my PC serial port configuration?
>
> I might be unavailable to respond to you tomorrow during the day, as I will be at Queretaro with restricted access to the Internet. Despite this I will be able to read my mail, not respond to it. Hope you don't mind.
>
> Your kind help is always welcome. Thanks.
>
> Regards,
>
>
>
> Edgardo Molina
> Dirección IPTEL
>
> www.iptel.net.mx
>
> T : 55 55 55202444
> M : 04455 20501854
>
> Piensa en Bits SA de CV
>
>
>
> Información anexa:
>
>
>
>
> CONFIDENCIALIDAD DE INFORMACION
>
> Este mensaje tiene carácter confidencial. Si usted no es el destinarario de este mensaje, le suplicamos se lo notifique al remitente mediante un correo electrónico y que borre el presente mensaje y sus anexos de su computadora sin retener una copia de los mismos. Queda estrictamente prohibido copiar este mensaje o hacer usode el para cualquier propósito o divulgar su en forma parcial o total su contenido. Gracias.
>
>
> NON-DISCLOSURE OF INFORMATION
>
> This email is strictly confidential and may also be privileged. If you are not the intended recipient please immediately advise the sender by replying to this e-mail and then deleting the message and its attachments from your computer without keeping a copy. It is strictly forbidden to copy it or use it for any purpose or disclose its contents to any third party. Thank you.
>
>
>
>
>
> On Oct 14, 2012, at 11:05 PM, SAIDJACK at aol.com wrote:
>
>> Hi Edgardo,
>>
>> I think the Z3805A and 58503A are identical, except in the rubber bumpers,
>> maybe the power supply voltage setting, and the ID string..
>>
>> I don't really care, the three units I have perform much better than
>> anything else I have, so that satisfies my requirements..
>>
>> In fact one of the units' ADEV can only be qualified by the BVA 8600 o
>> scillator I have, and I don't know if I am measuring the BVA performance or the
>> 58503A because I am measuring right at the specification of the BVA unit..
>> Wish I had two BVA's :)
>>
>> bye,
>> Said
>>
>>
>> In a message dated 10/14/2012 15:41:25 Pacific Daylight Time,
>> xe1xus at amsat.org writes:
>>
>> Derived question: Will I get better GPSDO performance if I use a 58503A
>> receiver? Or do you think our units match those 58503A GPSDOs out there?
>>
>> Again, thanks to everybody who helped me to figure out about my receivers
>> and their inner workings. As always, you all made my day.
>>
>>
>> Best regards,
>>
>>
>>
>> Edgardo Molina
>> Dirección IPTEL
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com
>> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the time-nuts
mailing list