[time-nuts] Nutty time-nuttery with WWVB
Charles Steinmetz
csteinmetz at yandex.com
Thu Nov 10 11:03:31 EST 2016
Peter wrote:
> Could I implement my own personal WWVB transmitter that would
> be powerful enough to be picked up by the clocks in my house?
> * * *
> Has anyone tried this?
Some on the list have, and I'm sure they will provide the details.
Others have mentioned the potential problems with interference to other
WWVB users. For starters, make sure you study and understand Part 15 of
the FCC rules before you put it on the air, or you could face a nasty
enforcement action. (Even if you are Part 15-compliant, you may still
screw up other users' reception and get a visit from the FCC when they
complain. I operate several very sensitive 60kHz receivers -- if you
live in my neighborhood, I'm almost certain to be unhappy about anything
you deploy.)
Note that the problem with most "atomic" clocks that I've seen is
actually not insufficient signal (in the wee hours of the morning, when
they try to synch). It is either excessive QRM, or orienting the clock
so its antenna has a null toward Fort Collins. Make sure the antenna
has a major lobe toward Fort Collins (this may require relocating the
entire clock or bringing the antenna out so you can orient it
independently), and that it is well clear of the AC mains distribution
wiring in your house and any other sources of QRM (wall warts, CFL
lamps, LED lamps, etc. (this may also require relocating the clock).
The typical clock using a loopstick antenna has lobes to the front and
rear, and nulls to the sides. Thus, mounting the clock on the western
exterior wall (for users on the east coast) is usually best. Putting it
directly in front of a west-facing window may help.
Best regards,
Charles
More information about the time-nuts
mailing list