[time-nuts] Opening an Isotemp OCXO
Christopher Hoover
ch at murgatroid.com
Tue Oct 18 12:26:39 EDT 2016
I got one open without too much much trouble with a propane torch. Work
fast, use gravity and have something pointy to pry with as you go.
-ch
73 de ai6kg
On Oct 18, 2016 6:14 AM, "Peter Reilley" <preilley_454 at comcast.net> wrote:
> I bought an Isotemp OCXO82-59 with a frequency of 10 MHz for a $3 at the
> MIT flea market.
> As expected it was dead. It heats up as expected but looking at the
> output with a scope there
> is nothing. However looking at the output with a spectrum analyzer I can
> see a faint 10 MHz
> signal. It seems that the oscillator is running but the output circuitry
> is dead. Reasonable
> assumption?
>
> Anyway, has anyone had any luck unsoldering the tin case without
> destroying it?
>
> Pete.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/m
> ailman/listinfo/time-nuts
> and follow the instructions there.
>
More information about the time-nuts
mailing list