[time-nuts] RE: HP 107BR

[Veenstra, Lester]

Well I'll be dammed !!
Ken Yamashita is still working out here after retiring once from Comsat
It still has the GTE tag on the rear.
     Les K1YCM/3


-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Robert E. Martinson
Sent: Thursday, September 15, 2005 11:16 AM
To: 'Discussion of precise time and frequency measurement'
Subject: RE: [time-nuts] RE: HP 107BR


Hey Les,

I installed that oscillator in Pam-1 in 1966.

73,
Bob Martinson
N1VQR
Retired, GTE/Sylvania PSO, GTE ISC, and finely GD.


-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Veenstra, Lester
Sent: Thursday, September 15, 2005 09:30
To: time-nuts at febo.com
Subject: [time-nuts] RE: HP 107BR



> I have a problem with my old faithful standard, an HP 107BR. The
> regulated voltages are zero, although the raw +46 is there. Anyone 
> have a power supply schematic I could set a copy of?
> 
> Well aged standard. It did better than 30 years service in our Paumalu
> Hi Intelsat earth station before moving the K1YCM/3 for additional 
> service.
> 
> Thanks
>       Les
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Veenstra, Lester.vcf
Type: text/x-vcard
Size: 707 bytes
Desc: Veenstra, Lester.vcf
URL: <http://febo.com/pipermail/time-nuts_lists.febo.com/attachments/20050915/4901fc01/attachment.vcf>