[time-nuts] Making the most of SRS Rb source
Christopher Hoover
ch at murgatroid.com
Thu Jan 19 04:31:44 UTC 2006
This is an interesting discussion and aimed directly at my homebrew efforts.
> How about using the PRS10 in time stamping mode where you feed it
> the 1 PPS from the GPS and use a uC to read back the time stamp
> and the GPS saw tooth to get the actual delta time? It would be
> easy to record these every hour and after a day or so make a
> tweak to the PRS10 frequency. This way the only additional
> equipment would the the uC connecting to the PRS10 serial port.
That's an interesting idea. I like it.
My goal is to put together a good GPSDO with isolated distribution.
I'm currently have a PRS10, an M12+ timing receiver, a couple TAPR TADD-1's
tied together on my bench. I aim to get it put into a single box with an
appropriate power supply and with some uC to drive a display and perhaps
USB. I was going to use the uC simply to intialize and monitor the PRS10
and M12+, but after Poul's comments about the PRS10, I think I had better
re-think this plan.
Currently the first bits of the initialization and monitoring code are
together and running on a spare Linux box.
(Is this the sort of thing that others would like to collaborate on? Some
help would be great.)
BTW, I asked Stanford Research last week about settings for the PRS10 with
1PPS driven from a GPS timing receiver. The recommendation was stock
settings with a long integration constant, i.e, PT14. I am currently
running this setting, but I haven't measured it yet ...
-- Christopher
More information about the Time-nuts_lists.febo.com
mailing list