[time-nuts] Entry level systems
Didier Juges
didier at cox.net
Sat May 27 22:18:56 UTC 2006
Thanks John,
That makes sense. I tried feeding the 10 MHz of two HP synthesizers and
got useless results. Now I see why. I understand that using the 1 pps
output makes more sense.
If my counter had the a/d output, I would be very close to having all I
need to synchronize the VCXO to GPS...
Didier KO4BB
John Ackermann N8UR wrote:
> I use time interval to compare frequency offset and stability by feeding
> the unknown signal into the start input, and the reference into the stop
> input. The actual time interval doesn't matter, but by tracking the
> delta in time interval you can determine offset and drift. Typically,
> you use 1pps to do this, but there are ways to use higher frequencies,
> though they run into problems with cycle slip if the two sources aren't
> very close to each other.
>
> John
> ----
>
More information about the Time-nuts_lists.febo.com
mailing list