[time-nuts] How to measure Allan Deviation?
Dr Bruce Griffiths
bruce.griffiths at xtra.co.nz
Sun Oct 22 23:33:04 UTC 2006
Didier
If you are going to use a PPS divider to divide the oscillator frequency
down to 1Hz, you will need to measure the inherent jitter of the divider
to ensure that it doesn't degrade the measurement resolution. It may be
necessary to resynchronise the divided output using a fast D flipflop to
reduce the inherent divider jitter to less than the 20ps resolution of
the 5370.
Bruce
More information about the Time-nuts_lists.febo.com
mailing list