[time-nuts] Re; Lucent RFTG-m-XO
Jim Miller
timenuts at jcmco.com
Tue Feb 6 21:41:31 UTC 2007
On Feb 6, 2007, at 4:05 PM, Phil Staton wrote:
> data on pin 9 (&5) :100200000032f3ac52E109cc
> starts with a colon
> cc seems to be a checksum
> the first 2 changes to a 1 if gps ant disconnected and reconnected,
> at the same time the no gps led comes on
> the zero after the 1st 2 changes to 4 if their really is no gps
The first digit is the talker - 0 for RB and 1 for XO.
The second digit is status - 0 for active, 1 for inactive
The third digit has always been 0 during my experiments.
The fourth digit is 0=warmup, 1=GPS lock, 2=holdover?, 3=fault/fail
> the block 32...52 seems to be a count from last power up
The 32F3AC52 is GPS time; it represents the number of seconds elapsed
since 6-Jan-1980:00:00:00.
The two digits before the time are a counter showing the number
of hours the module has been in its present state. Max count 0xff.
> the E109 has been constant throughout all tests
Mine say E004. The ROM version on my mezannine board is 4.
Would your ROM version happen to be 9?
Jim
More information about the Time-nuts_lists.febo.com
mailing list