[time-nuts] time-nuts Digest, Vol 31, Issue 85
Lee-Bradshaw
Lee-Bradshaw at Networks-Now.org
Wed Feb 28 14:16:25 UTC 2007
On Tuesday 27 February 2007 11:00 am, time-nuts-request at febo.com wrote:
John,
I have the Austron 1210-D manual.
Who would have the time to scan the manual for posting.
Lee> Send time-nuts mailing list submissions to
> time-nuts at febo.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> or, via email, send a message with subject or body 'help' to
> time-nuts-request at febo.com
>
> You can reach the person managing the list at
> time-nuts-owner at febo.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of time-nuts digest..."
>
>
> Today's Topics:
>
> 1. Re: Austron 1201-D (John Ackermann N8UR)
> 2. Re: Austron 1201-D (Mike Feher)
> 3. Re: Linux code for Prologix GPIB/USB (Ulrich Bangert)
> 4. Re: Austron 1201-D (Rob Kimberley)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 27 Feb 2007 08:31:02 -0500
> From: John Ackermann N8UR <jra at febo.com>
> Subject: Re: [time-nuts] Austron 1201-D
> To: Discussion of precise time and frequency measurement
> <time-nuts at febo.com>
> Message-ID: <45E43296.5040007 at febo.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Rob, I've been looking for the 1210D manual as well. Do you have more
> than one copy? If not, perhaps we can arrange a scanning party...
>
> John
> ----
>
> Rob Kimberley wrote:
> > Had,
> >
> > Do you mean 1210D? If so, the answer is yes. About an inch thick with
> > several fold out drawings. I'm in UK. Will cost approx ?18 (~$35US) to
> > air mail (untracked). International "Signed for" tracked options would be
> > more expensive.
> >
> > Rob Kimberley
> >
> > -----Original Message-----
> > From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> > Behalf Of Had
> > Sent: 27 February 2007 00:46
> > To: time-nuts-febo.com
> > Subject: [time-nuts] Austron 1201-D
> >
> >
> >
> > Greetings nuts,
> >
> > Would anyone have a manual for a Austron 1201-D Clock. Any format or I
> > can scan.
> >
> > Thanks,
> > Hadley, K7MLR
> >
> >
> >
> >
> >
> >
> >
> > A well regulated Militia, being necessary to the security of a free
> > State, the right of the people to keep and bare Arms, shall not be
> > infringed.
> >
> >
> >
> > This message (including any attachments) contains confidential
> > information intended for a specific individual and purpose, and is
> > protected by law. If you are not the intended recipient, you should
> > delete this message. Any disclosure, copying, or distribution of this
> > message, or the taking of any action based on it, is strictly prohibited.
> >
> >
> >
> > _______________________________________________
> > time-nuts mailing list
> > time-nuts at febo.com
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> >
> >
> >
> > _______________________________________________
> > time-nuts mailing list
> > time-nuts at febo.com
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>
> ------------------------------
>
> Message: 2
> Date: Tue, 27 Feb 2007 09:13:33 -0500
> From: "Mike Feher" <mfeher at eozinc.com>
> Subject: Re: [time-nuts] Austron 1201-D
> To: "'Discussion of precise time and frequency measurement'"
> <time-nuts at febo.com>
> Message-ID: <000401c75a79$7a06b0f0$8e2ec94b at eozpod1>
> Content-Type: text/plain; charset="iso-8859-1"
>
> I can use one also as I have a 1210D. Earlier inquiries for a manual
> never received a response. Regards - Mike
>
>
> Mike B. Feher, N4FS
> 89 Arnold Blvd.
> Howell, NJ, 07731
> 732-886-5960
> 908-902-3831 - cell
>
>
>
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of John Ackermann N8UR
> Sent: Tuesday, February 27, 2007 8:31 AM
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] Austron 1201-D
>
> Rob, I've been looking for the 1210D manual as well. Do you have more
> than one copy? If not, perhaps we can arrange a scanning party...
>
> John
> ----
>
> Rob Kimberley wrote:
> > Had,
> >
> > Do you mean 1210D? If so, the answer is yes. About an inch thick with
> > several fold out drawings. I'm in UK. Will cost approx ?18 (~$35US) to
>
> air
>
> > mail (untracked). International "Signed for" tracked options would be
>
> more
>
> > expensive.
> >
> > Rob Kimberley
> >
> > -----Original Message-----
> > From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]
>
> On
>
> > Behalf Of Had
> > Sent: 27 February 2007 00:46
> > To: time-nuts-febo.com
> > Subject: [time-nuts] Austron 1201-D
> >
> >
> >
> > Greetings nuts,
> >
> > Would anyone have a manual for a Austron 1201-D Clock. Any format or I
>
> can
>
> > scan.
> >
> > Thanks,
> > Hadley, K7MLR
> >
> >
> >
> >
> >
> >
> >
> > A well regulated Militia, being necessary to the security of a free
>
> State,
>
> > the right of the people to keep and bare Arms, shall not be infringed.
> >
> >
> >
> > This message (including any attachments) contains confidential
>
> information
>
> > intended for a specific individual and purpose, and is protected by
>
> law. If
>
> > you are not the intended recipient, you should delete this message.
>
> Any
>
> > disclosure, copying, or distribution of this message, or the taking of
>
> any
>
> > action based on it, is strictly prohibited.
> >
> >
> >
> > _______________________________________________
> > time-nuts mailing list
> > time-nuts at febo.com
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> >
> >
> >
> > _______________________________________________
> > time-nuts mailing list
> > time-nuts at febo.com
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>
> _______________________________________________
> time-nuts mailing list
> time-nuts at febo.com
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>
>
>
>
> ------------------------------
>
> Message: 3
> Date: Tue, 27 Feb 2007 17:14:46 +0100
> From: "Ulrich Bangert" <df6jb at ulrich-bangert.de>
> Subject: Re: [time-nuts] Linux code for Prologix GPIB/USB
> To: "'Discussion of precise time and frequency measurement'"
> <time-nuts at febo.com>
> Message-ID: <002501c75a8a$695eddc0$0202fea9 at athlon>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hal,
>
> no matter whether you use my stuff or not: The very first thing you
> should do after opening the serial port is to transmit a ++auto 0 to
> hinder the interface from sending something own its own. My own internal
> stuff reads as follows:
>
> if QCCom32.Opened then
> begin;
> Debugform.Console.WriteString('Port has been opened'+#13+#10);
> Qccom32.Flush;
> sendstring:='++auto 0'+#13+#10;
> sendflag:=true;
> autoenabled:=False;
> repeat
> sleep(10);
> application.ProcessMessages;
> until sendflag=false;
> debugform.Console.WriteString('Send ++auto 0 command'+#13+#10);
> sendstring:='++ver'+#13+#10;
> sendflag:=true;
> repeat
> sleep(10);
> application.ProcessMessages;
> until sendflag=false;
> debugform.Console.WriteString('Send ++ver command'+#13+#10);
> j:=0;
> repeat
> inc(j);
> sleep(100);
> until dataavailable or (j>=10);
> if dataavailable then
> begin;
> PLfound:=(pos('GPIB-USB',Valuebuffer)<>0);
> DataAvailable:=False;
> end;
>
> Best regards
> Ulrich Bangert
>
> > -----Urspr?ngliche Nachricht-----
> > Von: time-nuts-bounces at febo.com
> > [mailto:time-nuts-bounces at febo.com] Im Auftrag von Hal Murray
> > Gesendet: Dienstag, 27. Februar 2007 04:32
> > An: Discussion of precise time and frequency measurement
> > Betreff: Re: [time-nuts] Linux code for Prologix GPIB/USB
> >
> > > At the end of the USB cable there is a FTDI chip that (in
> >
> > conjunction
> >
> > > with the appropiate driver) emulates a serial port. This
> >
> > serial port
> >
> > > in turn is connected to the serial port of an AVR type of
> > > microcontroller. Because this microcontroller expects a certain
> > > setting of serial transmission parameters you have to set them
> > > correct, otherwise it will not understand your commands.
> >
> > Thanks. Makes sense, I guess. I was assuming they had
> > reprogrammed the FTDI
> > chip rather than adding another CPU. (I'm not sure why. The
> > AVR is pretty
> > obvious.)
> >
> > There is a layer of stuff I haven't sorted out yet. It's all
> > tangled up in
> > the GPIB device being at the far end of a serial (USB or
> > RS-232) string. The
> > Prologix defaults to automagiclly reading data when it
> > becomes available and
> > sending it up to the kernel rather than waiting for you to
> > explicitly poll it.
> >
> > I see two cases where that might get confusing. One is when
> > you send it a
> > command at about the time it sends you something. You can't
> > tell if the data
> > you get arrived before or after your command.
> >
> > My normal command sequence is running in single cycle mode so
> > it's easy to
> > stay in lock step once you get started. So far, I haven't
> > had any troubles
> > getting through initialization, but I'll bet my code would
> > screwup if it got
> > delayed for long enough in the right places.
> >
> > The other case is if you are talking to several devices.
> > Again, there is a
> > race as you switch devices. You can't tell if the string
> > arrived before or
> > after you switched. I think this case can be avoided by
> > switching to a
> > device that doesn't exist, checking for input, then switching
> > to the new
> > device. It probably requires some pauses in the right place.
> >
> > > I have only very limited Linux experience and even less
> >
> > with Windows
> >
> > > emulation under Linux.
> >
> > You probably know more about Linux than I do about Windows.
> >
> > I was just looking for a subroutine package rather than a GUI/IDE.
> >
> >
> >
> >
> >
> >
> > --
> > These are my opinions, not necessarily my employer's. I hate spam.
> >
> >
> >
> >
> > _______________________________________________
> > time-nuts mailing list
> > time-nuts at febo.com
> > https://www.febo.com/cgi-> bin/mailman/listinfo/time-nuts
>
> ------------------------------
>
> Message: 4
> Date: Tue, 27 Feb 2007 16:21:45 -0000
> From: "Rob Kimberley" <rk at timing-consultants.com>
> Subject: Re: [time-nuts] Austron 1201-D
> To: "'Discussion of precise time and frequency measurement'"
> <time-nuts at febo.com>
> Message-ID:
> <!&!AAAAAAAAAAAYAAAAAAAAAOYAZyOzV8ERq+LmT45ypI7CgAAAEAAAAD7YY8yXMSpClypxBo
>UbrJ0BAAAAAA==@timing-consultants.com>
>
> Content-Type: text/plain; charset="iso-8859-1"
>
> In view of the responses to the original post, I'll take the bull by the
> horns and scan it for the group. Will take me a while, so make yourselves a
> coffee and put your feet up.....
>
> :-)
>
> Rob
>
> -----Original Message-----
> From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
> Behalf Of John Ackermann N8UR
> Sent: 27 February 2007 13:31
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] Austron 1201-D
>
> Rob, I've been looking for the 1210D manual as well. Do you have more than
> one copy? If not, perhaps we can arrange a scanning party...
>
> John
> ----
>
> Rob Kimberley wrote:
> > Had,
> >
> > Do you mean 1210D? If so, the answer is yes. About an inch thick with
> > several fold out drawings. I'm in UK. Will cost approx ?18 (~$35US) to
> > air mail (untracked). International "Signed for" tracked options would
> > be more expensive.
> >
> > Rob Kimberley
> >
> > -----Original Message-----
> > From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com]
> > On Behalf Of Had
> > Sent: 27 February 2007 00:46
> > To: time-nuts-febo.com
> > Subject: [time-nuts] Austron 1201-D
> >
> >
> >
> > Greetings nuts,
> >
> > Would anyone have a manual for a Austron 1201-D Clock. Any format or I
> > can scan.
> >
> > Thanks,
> > Hadley, K7MLR
> >
> >
> >
> >
> >
> >
> >
> > A well regulated Militia, being necessary to the security of a free
> > State, the right of the people to keep and bare Arms, shall not be
>
> infringed.
>
> > This message (including any attachments) contains confidential
> > information intended for a specific individual and purpose, and is
> > protected by law. If you are not the intended recipient, you should
> > delete this message. Any disclosure, copying, or distribution of this
> > message, or the taking of any action based on it, is strictly prohibited.
> >
> >
> >
> > _______________________________________________
> > time-nuts mailing list
> > time-nuts at febo.com
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> >
> >
> >
> > _______________________________________________
> > time-nuts mailing list
> > time-nuts at febo.com
> > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>
> _______________________________________________
> time-nuts mailing list
> time-nuts at febo.com
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>
>
>
>
>
> ------------------------------
>
> _______________________________________________
> time-nuts mailing list
> time-nuts at febo.com
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>
> End of time-nuts Digest, Vol 31, Issue 85
> *****************************************
More information about the Time-nuts_lists.febo.com
mailing list