[time-nuts] 10811 Repair (was warmup / bad batch)

Jack Hudler jack at hudler.org
Mon Jan 22 23:41:21 UTC 2007


It's probably the thermistor. What model are you playing with?

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On Behalf
Of Jason Rabel
Sent: Monday, January 22, 2007 5:16 PM
To: 'Discussion of precise time and frequency measurement'
Subject: [time-nuts] 10811 Repair (was warmup / bad batch)

Okay, so I've partially disassembled my 10811, I have checked most of the
points in the manual and everything appears okay.

A couple questions though. There are a pair of black wires running from the
top PCB down under the board below it (I haven't removed that board yet to
see what is underneath), what are those wires for? I probed them and there
doesn't appear to be any power?

Second, the crystal has a red, green, and blue wire. I've probed all 3 of
those and nothing. I would of expected one to be power, unless that is what
the above mentioned black wires are for.

About to call it a day. tomorrow I'll finish disassembling and see what all
goes where.

Jason


_______________________________________________
time-nuts mailing list
time-nuts at febo.com
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts







More information about the Time-nuts_lists.febo.com mailing list