[time-nuts] ACE-III GPS receivers
jmfranke
jmfranke at cox.net
Sun Jan 28 02:51:10 UTC 2007
I purchased twelve inch ribbon cables with connectors for the Jupiter
receivers from Mouser. Their part number: 517-2M-ACAC-020-12.
Most laptop hard drives use 2.5mm cable.
John WA4WDL
----- Original Message -----
From: "Joseph Gray" <jgray at zianet.com>
To: "Discussion of precise time and frequency measurement"
<time-nuts at febo.com>
Sent: Saturday, January 27, 2007 8:40 PM
Subject: Re: [time-nuts] ACE-III GPS receivers
>I believe that laptop hard drives use that size ribbon cable.
>
> ----- Original Message -----
> From: "Didier Juges" <didier at cox.net>
> To: "Discussion of precise time and frequency measurement"
> <time-nuts at febo.com>
> Sent: Saturday, January 27, 2007 6:31 PM
> Subject: Re: [time-nuts] ACE-III GPS receivers
>
>
>> Hi Jason,
>>
>> I have looked everywhere for the 2mm hardware, and while I could find
>> connectors, the ribbon cable itself seems unavailable in short length
>> off-the-shelf. I will check Mouser (again...)
>
>
> _______________________________________________
> time-nuts mailing list
> time-nuts at febo.com
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>
More information about the Time-nuts_lists.febo.com
mailing list