[time-nuts] Troubleshooting SR DG435 Four Channel Digital Delay/Pulse Gen
Dr Bruce Griffiths
bruce.griffiths at xtra.co.nz
Mon Jul 2 04:18:28 UTC 2007
Brooke Clarke wrote:
> Hi:
>
> The DG535 Four Channel Digital Delay/Pulse Generator shows
> Ext Clk Error on power up.
> The obvious thing to do is turn the rear panel switch to INT, but after
> powering up with the switch in either position the same error message appears.
>
> Connecting an external 10 MHz to the clock input and with the INT/EX switch in
> either position the same error is there.
>
> The on line manual does not have schematics. Any thoughts?
>
>
Brooke
Is the longtailed pair Q502+ Q503 producing a 10MHz ECL level output signal?
Bruce
More information about the Time-nuts_lists.febo.com
mailing list