[time-nuts] Producing jitter with Phase Modulation

Bilal Amin bilal_amin at hotmail.com
Mon Mar 19 09:40:59 UTC 2007


Hi Everyone,

Some days back I emailed on the group regarding the jitter in the sampling clock of ADC. I  have tried the phase modulation method for producing the jitter. 
I used the HP 8648B Signal generator for this experiment. I modulated the RF wave (at 10 MHz) with noise using the modulating input of the Signal Generator. For noise I used a Noise gen. from General Radio Company. It has three options for frequency. 10K, 100K and 5 M Hz. 
I observed the output using an oscilloscope. The output wave form was jittery. BUT when changed the noise from 5M to 100K there was an increase in jitter.  Can any one help me out there, why this is happening? According to my understanding decreasing the bandwidth of noise  results in decrease in jitter as well. 
Also I want to calculate the jitter at the output. i.e. the amount of noise I am adding. I think I wont be able to do it over the oscilloscope. Any ideas ?

Regards

Bilal


More information about the Time-nuts_lists.febo.com mailing list