[time-nuts] Frequency counter recommendations

[David Dameron]

Hi all,
I have a run-of-the-mill frequency counter (8 digits, 0.1 and 1.0 sec gate,
no reference oscillator output or ext. input) and would like to upgrade to
something better. I would initially like to measure frequencies in the 10
MHz or below range with a resolution of better than 0.1 Hz.
>From reading this list have picked out a HP 5334 or a Racal-Dana 1991/1992.
Some of these have been recently on ebay, but that is not my preferred
source, the seller often does not state the options installed, as well as
the typical ebay problems.

Are there others someone would recommend, used?
-Dave D.