[time-nuts] Software Sawtooth correction prerequisites?

Dr Bruce Griffiths bruce.griffiths at xtra.co.nz
Sat May 12 09:18:26 EDT 2007


Jim Miller wrote:
> My first post...newbie...be gentle...
>
> I spent the last several evenings reading the archives and saw mention of 
> sawtooth error correction in software. Since the corrections to be applied 
> are on the order of 1e-9 seconds it would seem that the phase detector 
> outputs to which these are applied must be similar in resolution.
>
> That would seem to require a pretty hefty phase detector and a pretty 
> substantial computing resource. Doesn't sound inexpensive. Is there a way 
> around this?
>
> OTOH, the Dallas Semi delay line pushes the "computation" out into the input 
> of the phase detector at the cost of a $17 chip (1k qty) which in small 
> quantities is likely $50 or so. This would seem to allow for a wider variety 
> of phase measurement techniques.
>
> Do I have this right?
>
> tnx
>
> jim miller
> ab3cv 
>
>
> _______________________________________________
> time-nuts mailing list
> time-nuts at febo.com
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>
>   
Jim

DS1021-15 (SOIC package) price is about $31 (1 off) from the 
Maxim-Dallas on line shop

Bruce




More information about the time-nuts mailing list