[time-nuts] NTP problem on Windows
Mike Suhar
msuhar at woh.rr.com
Thu May 17 00:59:31 UTC 2007
I am not familiar with the Meinberg software so I am guessing that if you
are running that NTP software you would not be using Windows time service?
If you don't need Windows time service, go into services and stop the
windows time service and set it to "manual" or "disabled". My thinking is
the Windows time service may be conflicting with your time software.
Mike
W8RKO
-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Joseph Gray
Sent: Wednesday, May 16, 2007 7:20 PM
To: Discussion of precise time and frequency measurement
Subject: [time-nuts] NTP problem on Windows
I am running the Meinberg NTP software on two PCs. Both PCs are running
WinXP w/SP2, both are on the same network and both are syncing to servers at
pool.ntp.org. In the past, both clocks have shown that the two PCs had the
same time. Today, I just noticed that one of the PCs is running about 9
seconds fast, compared to my Casio WWVB watch.
As far as I know, nothing has changed to account for the difference. The PC
that is fast has been running without a reboot for three months. Does anyone
have any ideas?
_______________________________________________
time-nuts mailing list
time-nuts at febo.com
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
More information about the Time-nuts_lists.febo.com
mailing list