[time-nuts] Oscillator Hookup

Arnold Tibus Arnold.Tibus at gmx.de
Wed May 23 17:41:25 EDT 2007

Hallo Jack, thank you, 
I did load your file, compliments again for your big work. 
But perhaps you misunderstood my remarks.
This file I knew already, I have as well the original printed issue, 
my comments refer to the other file (.del) with the very
interesting annex, containing error corrections eg. adding missing 
sign reversals in formulas etc. etc. .
The drawings in that annex are newer and not yet in my issue 2332 
from 1985 and unfortunately not clearly readable in the file. 
I thought that the informations in the m. amendment 3010 and the 
previous 2332 are of general interest.

Arnold Tibus

On Wed, 23 May 2007 14:11:42 -0500, Jack Hudler wrote:

>Try this; http://www.hparchive.com/Manuals/HP-10811AB-Manual.pdf

>-----Original Message-----
>From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
>Behalf Of Arnold Tibus
>Sent: Monday, May 21, 2007 9:30 AM
>To: Discussion of precise time and frequency measurement
>Subject: Re: [time-nuts] Oscillator Hookup

>On Mon, 21 May 2007 01:28:55 -0700, Rex wrote:

>>On Sat, 19 May 2007 08:32:00 -0700 (PDT), k7hbg at dslextreme.com wrote:

>>>Hi everybody! I've got a bit of a mystery to solve;
>>> I was wondering if you have run in to an Agilent Crystal Oscillator p/n
>>>10811-60168 before. 

>>{Aside to TvB]
>>While looking for where I got that document, I noticed this file in the
>>same basic location:

>>Seems like it is a valid pdf file that is an HP 10811 manual, but with a
>>strange file extension. Is it meant to be there? Should the file name be
>>[end aside]

>Hello everybody, 
>this a.m. file is in fact a pdf file, if you download and save it as
>nnnn.pdf it is 
>perfectly readable (just exchange .del with .pdf) 
>Perhaps it should have been deleted (.del), but it contains good 
>additional informations.
>The content is a raw "analog" copy of the original manual but including 
>the Manual Updating Changes for instruments with up to serial numbers 
>prefixed through 3010, issued  29th of April 1990. 
>There are a lot of important changes in, unfortunately the schematics 
>are not all readable. 
>I would be interested to get these pages in better quality, because 
>these are not yet in the change note 2332 dated June 17, 1985 
>which I have as paper issue. (If I find a moment, I will try to provide it 
>as pdf.)
>As I could see, the most important change details are already in 
>this issue for number prefix 3232. 
>Attention: A lot of corrections are manual errors in the main issue 
>and do apply for all serial numbers! 

>Arnold Tibus, DK2WT

>time-nuts mailing list
>time-nuts at febo.com

>time-nuts mailing list
>time-nuts at febo.com

More information about the time-nuts mailing list