[time-nuts] LORAN-C antenna
Poul-Henning Kamp
phk at phk.freebsd.dk
Wed Nov 14 13:25:05 UTC 2007
In message <01da01c826c0$1e14b8f0$6501a8c0 at didierhp>, "Didier Juges" writes:
>); SAEximRunCond expanded to false
>Errors-To: time-nuts-bounces+phk=phk.freebsd.dk at febo.com RETRY
>
>OK, thanks for the useful information . I thought you might have resonated
>the loop to get some filtering ahead of the preamp, which is what I would
>have done, not knowing any better...
I also use that antenna for various other VLF experiments, DCF77, MSF etc,
so I didn't want to make it too resonant.
>[...]so I may tune the loop and get some filtering.
If you're doing your own LORAN-C receiver in software like me, then
it is a useful fact to remember that you can do pretty much anything
you want to your antenna signal, as long as you do the same to the
Loran-C reference pulse you use in your algorithms:
I have received quite acceptable LORAN-C signals with a 3kHz bandwidth
by correlating with a reference pulse that had been through the same
filter.
--
Poul-Henning Kamp | UNIX since Zilog Zeus 3.20
phk at FreeBSD.ORG | TCP/IP since RFC 956
FreeBSD committer | BSD since 4.3-tahoe
Never attribute to malice what can adequately be explained by incompetence.
More information about the Time-nuts_lists.febo.com
mailing list