[time-nuts] Re : HP10811 current versus temperature

Marc Bury marc_bury at yahoo.fr
Fri Nov 23 12:53:55 UTC 2007


If you look for 4 terminal current sensing resistors, you can check "Vishay Z-Foil Bulk Metal".
I have not tested them but they seem to have nice specs: 
VCS1625Z have a  TC of 0,05ppm/C  with value ranging from 0,3R to 2,0R, and stability to match.

-Marc-

> I have some 4 terminal current sense resistors at work, but they are very
> low values (0.1 ohm and lower), so what I may gain at the sensor I may loose
> in the amplifier. Right now, the 1 ohm resistor and OP-27 give a voltage
> that is way out of the noise, as the curve shows. If I can find more
> temperature stable resistors for the instrument amplifier, then I could use
> one of those 4 terminal resistors. I will see what I can get to improve this
> setup. As it is, it may not be extremely accurate in absolute terms, but it
> is precise and probably sufficiently relatively accurate for what I want to
> do.
>


      _____________________________________________________________________________ 
Ne gardez plus qu'une seule adresse mail ! Copiez vos mails vers Yahoo! Mail 


More information about the Time-nuts_lists.febo.com mailing list