[time-nuts] Where to get Winchester connections for Efratom FRK?

Robert E. Martinson REMartinson at rcn.com
Sat Nov 24 07:50:31 UTC 2007


OOPS-2

The GMCT is the standard size connector, what is used on mine is the high
density variety, so it's series SGM.
See http://www.connectpositronic.com/downloads/pdf/C008RevC_HighDenRec.pdf

I think the FRK units may have used several different connectors, some only
solder posts.

73, 
REM




-----Original Message-----
From: Robert E. Martinson [mailto:REMartinson at rcn.com] 
Sent: Friday, November 23, 2007 1:26 AM
To: 'Discussion of precise time and frequency measurement'
Subject: RE: [time-nuts] Where to get Winchester connections for Efratom
FRK?


OOPS, it's a GMCT 20,    (M not N).

REM

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Robert E. Martinson
Sent: Friday, November 23, 2007 1:11 AM
To: 'Discussion of precise time and frequency measurement'
Subject: Re: [time-nuts] Where to get Winchester connections for Efratom
FRK?


HI Tim,

I have 2 FRK's here both use a connector made by Positronic, it's a GNCT 20.
See http://www.connectpositronic.com/downloads/pdf/C009RevC_StdDenRec.pdf

The Positromic site says (for Australia):

Australia (Commercial & Industrial & selected Military Accounts)
Walcom Pty. Ltd
118 Pryor Road
Ourimbah, NSW 2258 Australia
Phone: + 61 2 4362 3477
Fax: + 61 2 4362 3293
www.walcom.com.au
Contact: Mark Walpole
mark at walcom.com.au


I bought one complete connector assembly on Ebay a while ago for like $10.



Regards,
Bob Martinson, N1VQR



-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of swingbyte
Sent: Friday, November 23, 2007 12:08 AM
To: Discussion of precise time and frequency measurement
Subject: [time-nuts] Where to get Winchester connections for Efratom FRK?


Hi all,
Now that I have my FRK working I have to find a connection for it.  I 
believe it is a winchester 20p and I have not been able to find one in 
Australia yet.  Is it worth while looking or should I just replace it 
with something else or even solder leads to it!
As an aside, what resolution counter is needed to calibrate the FRK?  Hp 
5328? HP 5370?

Thanks
Tim

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.




More information about the Time-nuts_lists.febo.com mailing list