[time-nuts] OT: Need HP 7475A Drivers for XP or Linux
Didier Juges
didier at cox.net
Sun Oct 21 02:32:12 UTC 2007
I did write some QuickBasic code for that plotter a number of years ago.
I used it to plot data from an HP 8566 that was subjected to calculations
that were more easily done in a PC than on the instrument.
I also plotted data from an HP network analyzer, forgot which.
If I recall, the commands are simple and the plotter is easy to control (if
you write your own code).
I am not aware of any drivers you can use with shrink-wrap software, but I
would be surprised if someone has not done that under Linux.
Didier KO4BB
> -----Original Message-----
> From: time-nuts-bounces at febo.com
> [mailto:time-nuts-bounces at febo.com] On Behalf Of Eric Fort
> Sent: Saturday, October 20, 2007 8:57 PM
> To: Discussion of precise time and frequency measurement
> Subject: [time-nuts] OT: Need HP 7475A Drivers for XP or Linux
>
> There seems to be a wealth of knowlege here about keeping
> older HP hardware running. Would anyone in this group have
> experience using a 7475A plotter under XP or Linux to plot
> test data or drawings. I'd like to get mine running again.
>
> Thanks,
>
> Eric
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com To unsubscribe,
> go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list