[time-nuts] Fury interface board.
John Ackermann N8UR
jra at febo.com
Mon Oct 22 22:23:01 UTC 2007
I'd be interested in one, George.
John
----
xaos at darksmile.net said the following on 10/22/2007 05:39 PM:
> ); SAEximRunCond expanded to false
> Errors-To: time-nuts-bounces+jra=fluffles.febo.com at febo.com RETRY
>
> Hello everyone,
>
> I was hacking away at the Fury and I decided that I needed an
> interface board to go along with it.
>
> So, I fired up my capture/layout program and so far this is what I have:
>
> First, the Fury board will attach to the interface board via 2 SMA connectors.
>
> The interface board will have holes to accommodate connectors for the
> HP 10544A, 10811A/B and 10811A-6011 OCXO. Including the 2 mounting
> screws.
>
> I also have this OCXO:
>
> http://www.crystekcrystals.com/crystal/spec-sheets/ocxo/CO27VS12DE-02-10_000.pdf
>
> So I would have the holes there for this device as well.
>
> I also need BNC connectors for the 10MHz sine wave and 1PPS.
>
> The board would need 24VDC and have regulators for 12V. 24VDC is
> needed by the HP oscillators.
>
> I'd like to see if the members of time-nuts would be interested in
> such a board.
>
> If so, I would make a production run for them. Standard 4 layer RoHS.
> It would be 6-8 weeks until delivery.
>
> Any suggestions are very much welcome.
>
> -George
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
>
More information about the Time-nuts_lists.febo.com
mailing list