[time-nuts] M$-Vi$ta-compliant PC RTC clock card?

[James Maynard]

Thanks, Joseph. I'll Google around and see what I can learn.

I do know how to install *most* unsigned device drivers. However,
MS Vista is fussy about the RTC service, and will *not* let me stop
Or pause that service.

Jim K7KK

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of Joseph Gray
Sent: Wednesday, 2007 September 19 18:12
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] M$-Vi$ta-compliant PC RTC clock card?

I don't remember the particulars, but not too long ago I read that someone 
figured out how to load unsigned drivers on Vista. You'll have to Google for

it, as I don't remember where the details were posted. It is technically an 
unauthorized "hack", but it's your PC, so you can do what you think best.

----- Original Message ----- 
From: "Didier Juges" <didier at cox.net>
To: "'Discussion of precise time and frequency measurement'" 
<time-nuts at febo.com>
Sent: Wednesday, September 19, 2007 7:05 PM
Subject: Re: [time-nuts] M$-Vi$ta-compliant PC RTC clock card?


>
>
>> -----Original Message-----
>> From: time-nuts-bounces at febo.com
>> [mailto:time-nuts-bounces at febo.com] On Behalf Of James Maynard
>> Sent: Wednesday, September 19, 2007 7:03 PM
>> To: time-nuts at febo.com
>> Cc: support at beaglesoft.com; rick at cnssys.com
>> Subject: [time-nuts] M$-Vi$ta-compliant PC RTC clock card?
>>
>>...
>> (I know that some on this list will say, "You nitwit, you
>> should using be another OS than M$ Vista." Such replies will
>> not be helpful to me.)
>>
>> James Maynard, K7KK
>> Salem, Oregon, USA