[time-nuts] TAC32 & Z3801A

[Rick Hambly (W2GPS)]

John,

If I had a Z3801A I might be inclined to add support for it to Tac32 but I
do not have one.

Rick
W2GPS
AMSAT LM2232
 
-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of John Ackermann N8UR
Sent: Friday, April 04, 2008 1:03 PM
To: billj at ieee.org; Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] TAC32 & Z3801A

The Z3801A doesn't talk native Motorola -- it has its own set of 
commands based on the SCPI protocol.  So I don't think you'll have any 
luck using the Motorola-based programs to talk to it.

John
----

Bill Janssen wrote:
> I was trying to get TAC32 to talk to my Z3801A, and no luck. I have
> HP SATSTAT working OK but not TAC32 (or SynTac). SATSTAT uses COM 1, at 
> 19200,7 bits and odd parity. Incidentally I modified the Z3801A to be 
> RS232, if that makes a difference
> 
> How do I convince TAC32 to connect to my Z3801A
> 
> Any help appreciated
> Bill K7NOM
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
> 
> 


_______________________________________________
time-nuts mailing list -- time-nuts at febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.