[time-nuts] Wenzel Associates 100 Mhz osc

[John Franke]

If labeled 12V, that means 12V, not 12V automobile.

----- Original Message ----- 
From: <n3izn at aol.com>
To: <time-nuts at febo.com>
Sent: Wednesday, December 03, 2008 1:33 PM
Subject: Re: [time-nuts] Wenzel Associates 100 Mhz osc


>I have some drive time so I might give Wenzel a call and see how it goes.
>
> Meanwhile I looked around some more and found some with PTI oscillators. 
> The pins are laid out in a square where as the Wenzel unit is in a 
> straight row. The attached cable is the same with the same colors so I'm 
> going to guess I can find the power and control leads. I'll make a test 
> set up and start playing.
>
> Got a few questions.
>
> When it says 12 volts, most times 13.8~ 14 should be fine? These are 
> labeled 12 volts.
> Will that 12 volts need to be regulated?
>
> Do the specs look?decent?
>
> Here is a link to the PTI unit.?
>
> http://www.mtronpti.com/pdf/xo5051_datasheet51607.pdf
>
> Thanks
> Chris
>
>
>
>
>
>> -----Original Message-----
>> From: time-nuts-bounces at febo.com
>> [mailto:time-nuts-bounces at febo.com] On Behalf Of n3izn at aol.com
>> Sent: Monday, December 01, 2008 2:00 PM
>> To: time-nuts at febo.com
>> Subject: [time-nuts] Wenzel Associates 100 Mhz osc
>>
>> I stumbled across a 100 Mhz oscillator. It comes from a
>> Harris Constellation RX/TX.
>>
>> According to the website part number is proprietary. So I
>> thought I would ask here or any info.
>>
>> Here is what is printed on it from top to bottom.
>>
>> 500-06769D
>> ISSUE 02
>> PPD 786-020590-053
>> 100 Mhz
>> +12 VDC
>> 0105-0201SSRG
>>
>> It has a SMA female or 100 Mhz out and 4 pins for power and AFC?
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com To unsubscribe,
>> go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to 
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to 
> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>