[time-nuts] Request for MC598X4 and Datum LPRO datasheet

[Neville Michie]

Hi,
The LPRO manual has a circuit mistake on page 16.
The north end of R145 should go to +17V, not the resistor junction.
It may make a difference when interfacing the unit.
Seasons Greetings
Neville Michie



On 27/12/2008, at 12:06 PM, Didier wrote:

> Go to http://www.ko4bb.com/cgi-bin/search.pl
> And enter lpro in the Search box
>
> Didier KO4BB
>
>> -----Original Message-----
>> From: time-nuts-bounces at febo.com
>> [mailto:time-nuts-bounces at febo.com] On Behalf Of Daniel Mendes
>> Sent: Friday, December 26, 2008 3:04 PM
>> To: time-nuts at febo.com
>> Subject: [time-nuts] Request for MC598X4 and Datum LPRO datasheet
>>
>> Hy, my name is Daniel, I lurk at this list trying to learn
>> something with the masters of time measurements  :)  I´ve
>> bought two MC598X4 from Ebay. Does someone have a datasheet
>> for them? Or at least the pinouts...
>> I´ve bought also an  Datum LPRO 102500-001 but the datasheet
>> is no more available at
>> http://www.symmetricom.com/media/pdf/manuals/man-lpro.pdf  .
>> Does someone have a copy?
>>
>>  Thanks!
>>
>>  Daniel
>>
>>
>> _______________________________________________
>> time-nuts mailing list -- time-nuts at febo.com To unsubscribe,
>> go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>> and follow the instructions there.
>>
>
>
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/ 
> time-nuts
> and follow the instructions there.