[time-nuts] FW: time-nuts Digest, Vol 53, Issue 112

[Didier]

When I replied to this message, it bounced (apparently the address
fre_eng at g4fre.com cannot be resolved)

Didier

> -----Original Message-----
> From: fre_eng [mailto:fre_eng at g4fre.com]
> Sent: Monday, December 29, 2008 8:00 AM
> To: didier at cox.net
> Subject: FW: time-nuts Digest, Vol 53, Issue 112
> 
> Very interesting project
> 
> what is the part number of the "base adaptor"? I searched mouser for 
> that term and didnt find one.
> 
> Thanks
> 
> Dave
> 
> 
> 

-----Original Response-----
From: Didier [mailto:didier at cox.net] 
Sent: Monday, December 29, 2008 10:30 AM
To: 'fre_eng'
Subject: RE: time-nuts Digest, Vol 53, Issue 112

Dave,

I did not remember the link, so I googled "Silabs Base Adapter" and this
came back

http://parts.digikey.com/1/parts/410050-toolstick-base-adapter-toolstickba.h
tml

:-)

If you want to program DIP chips (not Toolsticks), you also need a Debug
adapter

https://www.silabs.com/products/mcu/Pages/ToolStick.aspx

Scroll to the bottom of the page.

The Debug adapter plugs into the Base adapter and has a JTAG/C2 connector
that is convenient for prototypes (10 pin header, but you only need 4
wires).

Happy building!

Didier