[time-nuts] Spec An for phase noise measurements
Matt Ettus
boyscout at gmail.com
Thu Jan 24 00:43:46 UTC 2008
On Jan 23, 2008 4:26 PM, John Miles <jmiles at pop.net> wrote:
> Are you using a noise marker that yields dBc/Hz values? The FFT window
> function has its own required noise-response correction value, so if you're
> just looking at a marker and doing the log10(RBW) subtraction yourself, that
> could account for the difference.
>
> Also, if there is a noise marker, check to see if it reads dBc/Hz or dBm/Hz.
> Most of them read dBm/Hz values, which are obviously only equal to
> conventional dBc/Hz values if you're measuring a 0-dBm carrier.
I used the analyzer's phase noise function. It won't make a plot, but
will do measurements at a few spot offsets. It's not entirely clear
how it is calculating these, though.
Matt
More information about the Time-nuts_lists.febo.com
mailing list