[time-nuts] Thunderbolt Lives

Bill Beam wbeam at gci.net
Tue Jul 22 17:15:18 EDT 2008


In this case the Stored Position will never go green since 1) the Self survey
has not been configured to store the surveyed position and 2) you have not
manually stored a position.

You have two choices:  1)  Click on Setup, select Position..., fill in an appropriate
position and click Save Segment.  or 2)  Click on Setup, select Self-Survey...,
set the Save Position Flag to Save and click Save Segment.  Then click on Control
and Restart Self-Survey.

The unit was shipped configured not to save position after a self-survey.  This
assures a Self-Survey after power cycle.

Regards, Bill (NL7F)


On 7/22/2008 12:49:59 PM, David Ackrill (dave.g0dja at tiscali.co.uk) wrote:
> David C. Partridge wrote:
> > The self survey will go green after it has completed the survey as will
> the
> > stored position.
> 
> The Self Survey has gone green as Self-Survey Progress is at 100% now,
> and the Thunderbolt is seeing 7 out of the 8 satellites at the moment.
> However, Stored Position is still coloured yellow.
> 
> I'll leave it monitoring over night to see what happens.
> 
> Dave (G0DJA)
> 
> 
> 
> _______________________________________________
> time-nuts mailing list -- time-nuts at febo.com
> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.


Bill Beam
NL7F







More information about the time-nuts mailing list