[time-nuts] PCB for frequency dividers

David C. Partridge david.partridge at dsl.pipex.com
Fri Jul 25 20:47:39 UTC 2008


John,

Read the license - seems appropriate to me.  Happy to talk further, let's
take this off list.

Please use my email david dot partridge at dsl dot pipex dot com

I'll be away over the w/e so don't expect a prompt reply ...

Cheers
Dave

-----Original Message-----
From: time-nuts-bounces at febo.com [mailto:time-nuts-bounces at febo.com] On
Behalf Of John Ackermann N8UR
Sent: 25 July 2008 18:18
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] PCB for frequency dividers

David C. Partridge said the following on 07/25/2008 12:17 PM:

> BTW Someone suggested that this might be relevant to TAPR.   I'm very
happy
> to grant TAPR the free (no charge) use of the design, conditional only 
> on my retaining copyright.

TAPR's Time and Frequency Design Team (i.e., me) is definitely interested in
a divider design, though what I had in mind is slightly different than your
design, David, perhaps because of a slightly different idea of
functionality, as well as matching the footprint of the existing TADD-1 and
TADD-3 boards.  I've been a bit out of the loop lately because of some
medical problems, but would love to talk with you about this.

But more generally, and why I'm sending this to the list, I'd encourage
hardware designers to look at the TAPR Open Hardware License
(http://www.tapr.org/OHL) for their projects.  It's available for use by
anyone, whether or not connected with TAPR.

John

_______________________________________________
time-nuts mailing list -- time-nuts at febo.com To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.





More information about the Time-nuts_lists.febo.com mailing list