[time-nuts] Non-impedance matched antenna cables

[Didier Juges]

> -----Original Message-----
> From: time-nuts-bounces at febo.com 
> [mailto:time-nuts-bounces at febo.com] On Behalf Of Thomas A. Frank
> Sent: Friday, June 13, 2008 10:18 PM
> To: Discussion of precise time and frequency measurement
> Subject: Re: [time-nuts] Non-impedance matched antenna cables
> 
> > I've another antenna, but is a cheap one with magnetic 
> base, only used 
> > for a nixie clock :)
> 
> 
> I have one of those as well, a Trimble 28367-40 from eBay, it 
> is feeding my Thunderbolt (thank you TVB!), and it works fine 
> just sitting on the window sill - inside!
> 
> I am curious, however...how does one get TboltMon to SAVE the 
> surveyed position?  It had the proper value in a few hours, 
> and by the next day all the little software lights were 
> one...but the program doesn't seem to have saved the value.
> 
> Tom Frank
> 
> 

You can thank John Miles for that one:

http://www.ko4bb.com/cgi-bin/wiki/save.cgi?StorePositionOnTrimbleThunderbolt

Didier KO4BB