[time-nuts] THUNDERBOLT STATUS LED'S
Richard W. Solomon
w1ksz at earthlink.net
Mon Jun 23 16:24:35 UTC 2008
If there is NMEA Data available, there is a design utilizing a PIC chip
that will indicate 3D GPS Fix. It was published by W1AUV.
73, Dick, W1KSZ
-----Original Message-----
>From: Christian Vogel <vogelchr at vogel.cx>
>Sent: Jun 23, 2008 7:28 AM
>To: jshank <j-shank at comcast.net>
>Cc: Discussion of precise time and frequency measurement <time-nuts at febo.com>
>Subject: Re: [time-nuts] THUNDERBOLT STATUS LED'S
>
>Hello Jeff,
>
>> Has anyone determined how an interface could be incorporated into the
>> Thunderbolt so as to show if it was locked. Some status led's would be nice
>> such as can be fount on the Z3801's front panel.
>
>provided that there is no easily accessible connector with the relevant
>signals inside the Thunderbolt, the easiest thing would be a microcontroller
>circuit listening to the serial data on the 9pin DSUB port.
>
>About any microcontroller with the power to process the data
>at 9600 bps will be fine, which includes pretty much every AVR,
>PIC, 8051, MSP,… currently available.
>
>I was pondering about that myself, but unfortunately will be quite
>busy for the following month… ☹
>
> Chris
>
>_______________________________________________
>time-nuts mailing list -- time-nuts at febo.com
>To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
>and follow the instructions there.
More information about the Time-nuts_lists.febo.com
mailing list