[time-nuts] Racal Dana 1992 - GPIB interface (iovane at inwind.it)
Elio Corbolante
eliocor at gmail.com
Sun Mar 16 00:23:13 UTC 2008
>I can't check what type of interface is present on my two 1992-02M,
neither if the SK4 in present, because the counters are running and I
wan't stop them.
Unless they are rack mounted, you don't need to turn them off to
check what interface you have:
- remove the rear bezel (unscrew two screws)
- slide the 1992 cover until you can take a look to the GPIB board.
- Refer to the documentation to identify the board (see my page
number references in the previous post).
- touch with your finger the jumper (if present): if it is in the
default position you will feel two pins, otherwise (in GPIB mode) you
will fill the jumper.
> Are you using a 1992 in standard GPIB mode after having moved the
jumper? Where did you find the info?
I just tested it: in the default position it does not answer to the
'CK' command.
> P.S. are you in Italy?
Yes, I'm italian: you can directly contact me!
. ciao
_ Elio.
More information about the Time-nuts_lists.febo.com
mailing list